Raspberry Pi Camera Module 3 NoIR | 樹莓派官方原廠相機模組 V3 NoIR 版

NT$950 未稅

註:Pi 5 用需另購專用排線,樹莓派 Pi 5 相機排線

The Raspberry Pi Camera Module 3 NoIR is the latest entry in the Official Raspberry Pi range of camera modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-light sensitivity and HDR (High Dynamic Range) support!

貨號: R01-CAM-STD-V3-NOIR 分類: , , , ,


Raspberry Pi Camera Module 3 NoIR | 樹莓派官方原廠相機模組 V3 NoIR 版

註:Pi 5 用需另購專用排線,樹莓派 Pi 5 相機排線

The Raspberry Pi Camera Module 3 NoIR is the latest entry in the Official Raspberry Pi range of camera modules, offering a new 12 Megapixel Sony IMX708 image sensorpowered autofocusimproved low-light sensitivity and HDR (High Dynamic Range) support!

This NoIR version is infrared-sensitive with no InfraRed (NoIR) filter on the lens, which makes it perfect for shooting Infrared photography and taking pictures/video in low light (twilight) environments. For night photography, you’ll need to flood the target with infrared light.

The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version before adding to cart), giving you more options for your specific project needs. We also have a standard version which is better suited for daylight photography.

The module is capable of 4608×2592 pixel images and 4608×2592 @14 FPS/2304×1296 @56 FPS/1536×864 @120FPS video. When HDR is enabled, the resolution is limited to 2304×1296 @ 30 FPS.


《Compatibility (Important!)》


  • The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from the front sensor section. The new sensor is larger and may not fit all previous camera accessories
  • We are in the process of updating each camera accessory in the store to indicate compatibility within the product descriptions


  • The Camera Module 3 can only be used with libcamera – the previous raspistill/raspivid libraries will not work
  • You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and a specific version of libcamera


  • The Camera Module 3 is compatible with all Raspberry Pi boards with a camera connector (CSI connector)
  • To use this camera with a Raspberry Pi Zero (which has a smaller connector), you will need to use an adapter cable



  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3-megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  • 2-wire serial control of focus mechanism



  • Sensor: Sony IMX708
  • Resolution: 11.9 megapixels
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/vertical: 4608 × 2592 pixels
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filterNot present (NoIR)
  • Autofocus system: Phase Detection Autofocus
  • Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  • Ribbon cable length: 150mm
  • Cable connector: 15 × 1mm FPC
  • Compliance:
    • FCC 47 CFR Part 15, Subpart B, Class B Digital Device
    • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
    • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
  • Production lifetime: Raspberry Pi Camera Module 3 will remain in production until at least January 2030


《Lens Specifications》

  • Effective focal length 4.74mm
  • f/1.8
  • Diagonal field of view 75 degrees (at 16:9)
  • 35mm equivalent focal length roughly 28mm (full width) – 30mm (3:2 crop)
  • Focus 10cm – infinity




《Quick Start》

To check if your Camera Module 3 is connected properly, run this quick test:

libcamera-hello -t 0 --autofocus-mode continuous [ --qt-preview ]

If you want to play with the awesome new autofocus feature, here are some commands to try:

--lens-position 0.0 # Fixed focus at infinity
--lens-position 1.0 # Fixed focus at about 1m (not calibrated), the default
--lens-position 10.0 # Fixed focus at about 10cm (not calibrated)
--autofocus-mode continuous # Continuous AF during viewfinder and video capture
--autofocus-on-capture # Focus just before still image capture (libcamera-still only)

To see all options for the libcamera application, use: