CM5 | Raspberry Pi Compute Module 5 計算模組

描述

CM5 | Raspberry Pi Compute Module 5 計算模組 

※注意：本產品價格浮動較大，標價僅供參考，下單前請來信確認價格、庫存及交期([email protected])！

Raspberry Pi Compute Module 5（CM5） 是一款系統模組（System-on-Module, SoM），在適合嵌入式應用的外型尺寸中，提供與 Raspberry Pi 5 相同等級的運算效能。

CM5 採用 四核心 Arm Cortex-A76 處理器，支援 雙 4Kp60 HDMI 顯示輸出、Gigabit Ethernet，並可選配 完整認證的無線通訊模組，提供 Wi-Fi® 與 Bluetooth 連線功能。同時提供多種 RAM 容量與 eMMC 快閃記憶體配置選項，讓開發者能在自有的客製化系統與外型設計中，充分運用 Raspberry Pi 5 強大的硬體效能與最佳化的軟體生態系。

相較於前一代 Compute Module 4（CM4），CM5 新增更多 I/O 介面，提供更高的設計彈性與更廣泛的產品與應用開發可能性。針對成本敏感型應用，CM5 亦提供 不含 eMMC 快閃記憶體的「Lite」版本。

CM5 採用與 CM4 相同的外型規格，搭載 兩組 100-pin 高密度連接器，可直接延續既有的模組化設計架構。

 

Raspberry Pi Compute Module 5 (CM5) is a system-on-module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications.

Featuring a quad-core Arm Cortex-A76 processor, dual 4Kp60 HDMI output, Gigabit Ethernet, optional fully-certified wireless module providing Wi-Fi® and Bluetooth connectivity, and a variety of RAM and eMMC flash options, Compute Module 5 enables you to leverage Raspberry Pi 5’s powerful hardware and optimised software stack in your own custom systems and form factors.

In comparison with its predecessor (CM4), Compute Module 5 features additional I/O interfaces, allowing even more flexibility and providing a greater breadth of options for product and application design. For cost-sensitive applications, Compute Module 5 is also available without eMMC flash (‘Lite’ variants).

CM5 uses the same form factor as CM4, featuring two 100-pin high density connectors.

《Specification》

• 55 mm × 40 mm × 4.7 mm module
• 4 × M2.5 mounting holes
• Broadcom BCM2712 quad-core 64-bit Arm Cortex-A76 (Armv8) SoC @ 2.4GHz
• Memory options:
  • 2GB, 4GB, 8GB, or 16GB LPDDR4-4267 SDRAM with ECC
  • 0GB, 16GB, 32GB or 64GB eMMC flash memory
• Options for certified radio module containing:
  • 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless
  • Bluetooth 5.0, BLE
  • On board electronic switch to select between PCB trace or external antenna
• Gigabit Ethernet PHY supporting IEEE 1588
• 1 × PCIe x1 root complex, Gen 2 (5Gbps)
• 1 × USB 2.0 port (high speed)
• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
• Up to 30 × GPIO supporting either 1.8V or 3.3V signalling and peripheral options:
  • Up to 5 × UART
  • Up to 5 × I2C
  • Up to 5 × SPI
  • 1 × SDIO interface
  • 1 × DPI (parallel RGB display)
  • 1 × I2S
  • Up to 4 × PWM channels
  • Up to 3 × GPCLK outputs
• 2 × HDMI 2.0 ports (supports up to 4Kp60 on both ports simultaneously)
• 2 × 4-lane MIPI ports supporting both DSI (display port) and CSI-2 (camera port)
• 4Kp60 HEVC decoder
• OpenGL ES 3.1 graphics, Vulkan 1.3
• 1 × SDIO 2.0 (CM5 Lite)

《下載》

• Raspberry Pi Compute Module 5 product brief
• Raspberry Pi Compute Module 5 datasheet
• Raspberry Pi Compute Module 5 design files